Reset Toner Brother MFC series

Printer Blog >> Help >> Reset Toner Brother MFC series

Brother MFC printer toner reset

Problem: The printer does not recognize the toner

Brother MFCA can sometimes happen that when installing the printer toner will launch messages such as "Replace Toner" or "Out of toner" or simply "toner error". Do not worry, it is relatively common to occur in Brother printers when you install a toner that is not the manufacturer's brand.

In this case, the solution is quite simple. First we recommend you try to make toner restart before proceeding with the steps listed below you.

If the steps you still has problems, try to do the following after performing:

1. Open the front cover of the printer (where the toner is introduced)
2. On the printer display you will get a message like "Front cover open" or "Cover Open".
3. Press the "CLEAR" or "DELETE" button.
4. A beep sounds in the printer and the display appears the message "Replace Drum?"
5. Click on the following combination * 00 numeric keypad and press the "ENTER" button.
6. Close the front cover, the printer will restart.
7. If after you reset the printer toner still has problems, try uninstalling the printer and reinstall it again. Optimally, in these cases, is that again install the software CD that comes with the printer, if not, you can download the driver from the official website of Brother.

Why does this happen?

As discussed above, it is relatively common to happen with Brother laser printers. Some printer models have an internal page counter printers that are renewed as the consumable is changed. Sometimes this is not done automatically reboot and the printer does not recognize the toner as brand new or you fail. That is why, so it is necessary to inform the printer that you have installed a new consumable and you have to start counting from zero.

These steps pose no risk to the printer, so if we recommend is that you read completely before starting to perform them.

What if it does not recognize the toner?

If you're still having problems despite this, it is best that you contact the store that supplied the toner because you may simply this is defective and replace it with a new one you can print normally.

Original post: Resetear toner impresoras Brother MFC series

HP Laserjet Pro M476 MFP - Print page Cleaning

Home >> Help  >> HP Laserjet Pro M476 MFP - Print page Cleaning

Print page Cleaning HP Laserjet Pro M476 MFP 

Solution toner stains on prints

It is possible that impressions can use to start out with stains or soils both front and back sides of the sheet. We think that laser printers take some supplies that are called carry toner and dust inside.

This dust is very fine and can get into any small hole or slot producing long problems in our printer.

Check out our post if you do not know what a toner or want to know how laser printers work.

It is important to perform maintenance on a regular basis for the printer to work as long as the first day and help to increase their shelf life so it is not more you take a look at post on some of our recommendations for maintaining the printer.

To print the cleaning page of the HP Laserjet Pro M476 MFP follow the steps below you say:

HP STEPS CLEANING PAGE

• A4 plain paper loaded in the printer
• With the printer on, we touch on the home screen the "Settings" button.
• Now press the "Service" menu
• Touch the OK button to start cleaning.
• When you leave the blade, remove and re-load it into the tray with the same orientation and wait until the process is completed.

There are times we have to do this process several times since with one may not be enough. However, if you do it after the problem still exists, some of the consumables may be defective and then you have to change it.

Clean the scanner

• Turn off the printer and disconnect it from the power cord to make sure it is turned off at all times.
• Open the scanner lid and clean both the glass and the white plastic that is on the top with a cloth or sponge very soft and slightly dampened with glass cleaner. (Do not use abrasives as acetone, ammonia, alcohol and the like).
• While dry glass and plastic with a dry lint-free cloth.
• Connect the printer again and try to scan or copy something, go! You have your impeccable printer!

We also advise occasionally make an internal cleaning of the printer. To do this we will open the printer cover and we will draw one by one all replaceable components (toner, drum ...). With a dry cloth and if possible, lint-free, we all internal cleaning of the printer to remove any dust that may have accumulated. Then we will be placing one by one the components that we have taken.

If after changing the toner that is producing stains and having made several cleanings are coming out defects in the printer, it is best that you contact your service printer as the problem may be in any part of the printer that it can not be changed if not a professional.

HP laser printers offer very good results and have support behind you can help with the problems that will arise.

Look at the original post in Consejos Impresoras

HP Laserjet Pro M476 MFP - Print page Cleaning

Home >> Help >> HP Laserjet Pro M476 MFP - Print page Cleaning

Print page Cleaning HP Laserjet Pro M476 MFP

Solution toner stains on prints

It is possible that impressions can use to start out with stains or soils both front and back sides of the sheet. We think that laser printers take some supplies that are called carry toner and dust inside.
This dust is very fine and can get into any small hole or slot producing long problems in our printer.

Check out our post if you do not know what a toner or want to know how laser printers work.

It is important to perform maintenance on a regular basis for the printer to work as long as the first day and help to increase their shelf life so it is not more you take a look at post on some of our recommendations for maintaining the printer.




To print the cleaning page of the HP Laserjet Pro M476 MFP follow the steps below you say:

STEPS HP CLEANING PAGE

• A4 plain paper loaded in the printer
• With the printer on, we touch on the home screen the "Settings" button.
• Now press the "Service" menu
• Touch the OK button to start cleaning.
• When you leave the blade, remove and re-load it into the tray with the same orientation and wait until the process is completed.

There are times we have to do this process several times since with one may not be enough. However, if you do it after the problem still exists, some of the consumables may be defective and then you have to change it.

Clean the scanner

Turn off the printer and disconnect it from the power cord to make sure it is turned off at all times.
Open the scanner lid and clean both the glass and the white plastic that is on the top with a cloth or sponge very soft and slightly dampened with glass cleaner. (Do not use abrasives as acetone, ammonia, alcohol and the like).
While dry glass and plastic with a dry lint-free cloth.
Connect the printer again and try to scan or copy something, go! You have your impeccable printer!

We also advise occasionally make an internal cleaning of the printer. To do this we will open the printer cover and we will draw one by one all replaceable components (toner, drum ...). With a dry cloth and if possible, lint-free, we all internal cleaning of the printer to remove any dust that may have accumulated. Then we will be placing one by one the components that we have taken.

If after changing the toner that is producing stains and having made several cleanings are coming out defects in the printer, it is best that you contact your service printer as the problem may be in any part of the printer that it can not be changed if not a professional.

HP laser printers offer very good results and have support behind you can help with the problems that will arise.

Look at the original post in Consejos Impresoras

Restart Printer Brother DCP-1510 toner

Home >> Save >> Restart toner Brother DCP-1510 printer

Save on toner with continue mode

How to skip the message of "change toner" on printer Brother DCP-1510

In many of monochrome printers Brother jumps a warning "low toner" or "change toner" when they recognized that the toner is finished. However, as not all the same print, if you skip this error when prints jump totally sharp and well, you can skip this message and continue using the toner.

This is what is known as "Continue Mode" Brother toners.

Activate "CONTINUE MODE"

"Continue mode" it serves to resume printing again despite the message that appears on the LCD screen of your Brother printer. Activating this mode may cause the quality of the prints is not as good as at home but at least we can continue to use the toner to the actual end of its useful life.

When activated "mode to continue" the printer continues releasing messages "change toner" "toner low" or "spent toner". This mode is disabled once a new toner so you'll have to activate it every time you're with a new toner is installed.

Then you leave the steps to activate the "mode continue":

• Press the "Menu" key and select "General Settings" >> "Replace Toner".
• Continue mode Brother
• Now using the arrows up or down, select "Continue" and click "OK".
• Press the "Stop / Exit" and go! Button

Look at the original post in Consejos Impresoras